GT-JDG6-180整體系列電動機智能監控器主要適用于額定頻率50HZ/60HZ，額定工作電流至630A的電路中，作用于三相交流電動機的過載、堵轉、斷相及三相不平衡、欠壓、過壓、欠流、漏電等保護，并且識別和判定電動機的各種不正常運行狀態以及各種故障類別進行監控和歷史事件查詢。

GT-JDG6系列電機智能監控裝置主要功能及創新點：

■ 輔助電源支持AC36V、AC110V、AC220V（標配）、AC380V定制。

■ 硬件體系采用分布式結構設計，模塊化、標準化程度高，安裝方便，易于組網，便于現場維護。

■ 所有接線全部采用即插即拔的插頭聯接方式，使用具有高可靠性的插件，徹底消除接觸不良的隱患。

■ 采用背插式結構，強弱電完全分開，可大大減少外部電磁干擾在弱電側的耦合，增強裝置的抗干擾能力，提高其可靠性和安全性。

■ 配置有過載、欠載、堵轉、阻塞、電流不平衡、斷相、接地、漏電、欠壓、過壓等保護功能。

■ 標配有遙信起動(保護器自身起動)、直接起動(機旁按鈕盒全壓起動)、正反起動降壓起動(星三角、自耦變壓器、頻敏變阻器起動)等多種起動方式，而且起動方式可現場設定。

■ 配置有測量參數信息、故障記錄、運行管理信息、方便查詢故障原因，進行電機維護。

■ 配置有來電自起動功能。

■ 可通過附加增選零序電流測量的漏電保護功能。

■LED數碼管顯示，簡單易用，特別適用于現場調試和維護。

■ 采用工業級微處理器，構成的高性能成套保護測控裝置，具備保護、測量、控制和報警功能。

■開關量輸出D0可自由選定已編程功能。

■ 配有1路標準的4-20mA電流變送輸出。

■ 標準RS-485通訊接口，ModbusRTU通訊規約。

GT-JDG6-180 series intelligent controller of motor is mainly used in the circuit of rated frequency 50HZ/60HZ, rated current up to 630A, overload, in the three-phase AC motor locked rotor, fault phase and three-phase unbalance, undervoltage, overvoltage, under current and leakage protection, and to identify and judge the motor normal operation condition and all all kinds of fault monitoring and query the historical events by category.

Main functions and innovation points of GT-JDG6 series motor intelligent monitoring device:

In the auxiliary power supply support for AC36V, AC110V, AC220V (standard), AC380V custom.

In the hardware system using distributed architecture design, modular, high degree of standardization, convenient installation, easy networking, convenient on-site maintenance.

- all the wiring used in all plug and plug connection drawing, using high reliability of the plug-in, eliminate the hidden danger of bad contact.

In the back insert structure, electrical completely separate, can greatly reduce the external electromagnetic interference coupling in low voltage side, enhance the ability of anti-jamming devices, improve the reliability and safety.

- equipped with overload, underload, blocking, blocking, current imbalance, phase failure, grounding, leakage, undervoltage and overvoltage protection function.

Remote starting - Standard (self starting protector), direct starting (machine side button box full voltage starting, starting and starting) (star delta, autotransformer, frequency sensitive rheostat starting) and other starting mode, and can set the starting mode.

- equipped with measuring parameter information, fault records, operation management information, convenient query failure, motor maintenance.

Call self starting function - configuration.

- through the leakage protection function of the additional CO opted measurement of zero sequence current.

- LED digital display, easy to use, especially suitable for on-site commissioning and maintenance.

- using industrial grade high performance microprocessor, complete protection device structure, with protection, measurement and control and alarm function.

D0 - switch output can be freely selected programming function.

Send the output 4-20mA current - with 1 standard variable.

Standard RS-485 communication interface, ModbusRTU communication protocol.